Kia Sorento: Adjustment

Adjustment

Glass Adjustment

Check the damage of glass run channel and replace it if necessary.

1.	Remove the rear door trim. (Refer Rear Door - "Rear Door Trim")

2.	Remove the rear door window glass hole plug (A).

3.	Loosen the bolts, adjust the spacing of the glass (A) by moving the glass from side to side and then tighten the bolts.

4.	Check that the rear door window glass operates properly.

Striker Adjustment

Loosen the screws, adjust the striker (A) by moving it back and forth, left and right, and then tighten the screws.

Tightening torque :

16.7 - 25.5 N·m (1.7 - 2.6 kgf·m, 12.3 - 18.8 lb·ft)

Body (Interior and Exterior) — Door (Rear) / Adjustment illustration

2.	Check that the rear door opens and closes properly.

Door Adjustment

1.	Check that the gap between the door and the body is even on a flat surface of the vehicle.

Loosen the rear door hinge (A) bolts, adjust the rear door by moving it back and forth, left and right, and then tighten the bolts.

Tightening torque

(B) : 9.8 - 19.6 N·m (1 - 2 kgf·m, 7.2 - 14.5 lb·ft)

Body (Interior and Exterior) — Door (Rear) / Adjustment illustration

Component and Component Location Rear Door 1. Rear Door Delta Inner Cover2. Rear Door Trim3. Rear Door Module4. Rear Door Out...

Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the rear door delta inner c...

Manuals list