Kia Sorento: Interior D
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Front pillar trim mounting hole (Ø8.5) |
Front pillar trim mounting hole (Ø8.5) |
Cowl crossbar mounting hole (Ø9) |
|
|
|
|
| Front door checker mounting hole (Ø11) |
Cowl side trim mounting hole (Ø8.5) |
1st Seat belt height adjust upper mounting hole (Ø15) |
|
|
|
|
| 1st Seat belt height adjust lower mounting hole (Ø15) |
Rear door checker mounting hole (Ø11) |
1st seat belt pretensioner mounting hole (Ø12.2) |
|
|
|
|
| Curtain airbag mounting hole (Ø6.6) |
2nd seat belt upper mounting hole (Ø15) |
Rear door striker mounting hole (Ø13) |
|
|
|
|
| 2nd seat belt pretensioner mounting hole (Ø15) |
2nd seat belt lower anchor mounting hole (Ø15) |
Curtain airbag mounting hole (Ø6.6) |
|
|
|
|
| Quarter inner panel tooling hole (Ø15) |
Quarter inner panel trim mounting hole (Ø6.6) |
Luggage side trim mounting hole (Ø8.5) |
|
|
|
|
| Parking brake lever mounting hole (Ø9) |
Side sill inner reinforcement tooling hole (Ø7) |
1st seat mounting hole (Ø13.3) |
|
|
|
|
| 2nd seat mounting hole (Ø11) |
Floor wiring harness mounting hole (12X7) |
Rear floor panel tooling hole (Ø16) |
|
|
|
|
| Rear floor panel tooling hole (Ø15) |
Tail gate striker mounting hole (Ø13) |
Interior C
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Rear Body
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Side outer p ...
See also:
Emergency starting
Connect cables in numerical order and disconnect in reverse order.
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle ...
Mode Control Actuator Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the driver's side crash
pad side cover.
...
Copyright В© www.ksmanual.com 2014-2024