Kia Sorento: Specifications - Body (Interior and Exterior) - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body (Interior and Exterior) / Specifications

Items
Specification
Hood
Type
Rear hinged, gas lifter type
Front Door
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
Locking system
Pin-fork system
Rear Door
Construction
Front hinged, full door construction
Regulator system
Wire-drum type
Locking system
Pin-fork system
Tail Gate
Type
Front hinged, gas lifter type
Seat Belts
Front
3 point type with Emergency Locking Retractor (E.L.R)
Rear
3 point type with Emergency Locking Retractor (E.L.R)
2 point type

Body (Interior and Exterior)
...

Tightening Torque
Items N.m Kgf.m lb-ft Front and rear doors Door hinge to body 33.3~41.2 3.4~4.2 24.6~30.4 Door hinge to door 21 ...

See also:

Antenna Removal
1. Remove the rear roof trim. (Refer to Body - "Roof trim") 2. Disconnect the power cable (A). 3. ...

Certification label
The certification label is located on the driver's door sill at the center pillar. This label shows the maximum allowable weight of the fully loaded vehicle. This is called the GVWR (Gross Veh ...

Oil Pan Installation
1. Install the oil pan. (1) Using a gasket scraper, remove all the old sealant material from the gasket surfaces. ...

Copyright www.ksmanual.com 2014-2025