1. |
Remove the rear roof trim.
(Refer to Body - "Roof trim")
|
2. |
Disconnect the power cable (A).
|
3. |
Disconnect the connectors (A) from the roof antenna.
|
4. |
Remove the roof antenna (B) after removing a nut (A).
|
Opening the hood
1. Pull the release lever to unlatch the hood. The hood should pop open slightly.
WARNING
Open the hood after turning off the engine on a flat surface, shifting the
shift lever to the P (Park) po ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine
speed.
...
Specification
Item
Specification
Ultrasonic sensor
Voltage rating
DC 12 V
Detecting range
30 cm ~ 120 cm
Operation voltage
DC 9 ~ 16 ...