Kia Sorento: Cup holder - Interior features - Features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Cup holder

Second Generation XM (2011-2024) / Kia Sorento XM Owners Manual / Features of your vehicle / Interior features / Cup holder

WARNING - Hot liquids

WARNING

Keep cans or bottles out of direct sun light and do not put them in a vehicle that is heated up. It may explode.

Cups or small beverage cans may be placed in the cup holders.


Cups or small beverage cans may be placed in the cup holders.

Bottle holder

Bottles may be placed in the holder.


Bottles may be placed in the holder.

✽ NOTICE

Only bottles should be place in the holder as it is written in the vehicle “BOTTLE ONLY”.

Sunvisor

Use the sunvisor to shield direct light through the front or side windows. To


Use the sunvisor to shield direct light through the front or side windows. To use the sunvisor, pull it downward.

To use the sunvisor for the side window, pull it downward, unsnap it from the bracket (1) and swing it to the side (2).

Adjust the sunvisor extension forward or backward (3).

To use the vanity mirror, pull down the visor and slide the mirror cover (4).

The ticket holder (5) is provided for holding a tollgate ticket. (if equipped)

The actual sunvisor lamp in the vehicle may differ from the illustration.

CAUTION - Vanity mirror lamp

If you use the vanity mirror lamp, turn off the lamp before returning the sunvisor to its original position, otherwise it could result in battery discharge and possible sunvisor damage.

WARNING

For your safety, do not obstruct your vision when using the sunvisor

Interior features
...

Power outlet
The power outlet is designed to provide power for mobile telephones or other devices designed to operate with vehicle electrical systems. The devices should draw less than 10 amps with the engine ...

See also:

External Amplifier Removal
External Amplifier 1. Remove the passenger seat assembly. (Refer to Body - "Front Seat Assembly") 2. Remove the external a ...

Blind Spot Detection Switch Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel. (Refer to Body - "Crash Pad") ...

Inspection
Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cov ...

Copyright © www.ksmanual.com 2014-2024