Kia Sorento: Circuit Diagram

Signal Waveform

...

Inspection

1. Connect the GDS on the Data Link Connector (DLC). 2. Measure the output voltage of the RPS at idle and various engine speed. ...

See also:

Oil Level Gauge & Pipe Removal and Installation
1. Remove the oil gauge(A). 2. Remove the intake manofold. (Refer to Intake And Exhaust System - "Intake Manifold") ...

Rear Differential Carrier Disassembly
Rear differential carrier disassembly 1. Drain oil by removing the drain plug (A) and filler plug (B) before disassembling the rear differential carrier. ...

Compressor Installation
1. Make sure the compressor mounting bolt with the correct length is screwed in. Tighten the mounting bolts with the specified tightening order. ...