Kia Sorento: Engine Room Under Cover Components

Engine Cover Removal and Installation

1. Remove the engine cover (A). 2. Install in the reverse order of removal. ...

Engine Room Under Cover Removal and Installation

1. Unfasten the fasteners and bolts and then remove the engine room under cover (A). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf ...

See also:

Installation
   • Install the component with the specified torques. • ...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the purge control solenoid valve connector (A) ...

Component Location
1. Rear wiper arm & blade 2. Tailgate glass hole 3. Grommet 4. Rear wiper arm nut 5. Rear wiper motor assembly 6. Head cap 7. Rear wiper motor bolt ...