1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the auto defogging sensor cover (A).
|
3. |
Disconnect the connector (B) and then remove the auto defogging
sensor (C).
|
4. |
Install in the reverse order of removal.
|
Front Body C
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
Auto Head lamp leveling Unit Circuit Diagram
...
Compressor Description
The compressor is the power unit of the A/C system.
It is located on the side of engine block and driven by a V-belt of the
engine.
The compressor changes low pressure and low temperatur ...