1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front door trim.
(Refer to Body - "Front Door")
|
3. |
Remove the IMS switch (A) after disconnecting the connector (B).
|
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Description
Automatic transaxle system relies on various measurement data to determine
the current control status and extrapolate the necessary compensation values.
These values are used to control the a ...
Fluid Component Location
1. ATF Injection hole(eyebolt)
2. Oil level plug
3. Oil drain plug
...