Kia Sorento: Accelerator Pedal Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2022 Service ManualKia Sorento: Accelerator Pedal Installation

Second Generation XM (2011-2022) / Kia Sorento XM 2011-2022 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Accelerator Pedal Installation

1.
Install in the reverse order of removal.

Accelerator pedal module installation nut:
16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18.8 lb-ft)
Accelerator pedal module installation bolt:
8.8 ~ 13.7 N.m (0.9 ~ 1.4 kgf.m, 6.5 ~ 10.1 lb-ft)

Accelerator Pedal Removal
1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the accelerator position sensor connector (A). ...

Delivery Pipe Removal
   In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be inju ...

See also:

High beam indicator light / High beam assist indicator light (if equipped)
High beam indicator light This light shows that the headlights are in the high beam mode. This indicator light also illuminates when the headlight flasher is operated. High beam assist indicator li ...

State emission testing (U.S. only)
WARNING Only use a four-wheel dynamometer when testing an All-Wheel Drive model. Testing of an AWD model must NEVER be performed on a single two-wheel dynamometer. Attempting to do so will result ...

Start/Stop Button Installation
1. Install the start/stop button. 2. Install the start/stop button cover. 3. Install the crash pad lower panel. ...

Copyright © www.ksmanual.com 2014-2022