Kia Sorento: 4WD ECU Circuit Diagram and Connector
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / 4 Wheel Drive (4WD) System / 4WD Control System / 4WD ECU Circuit Diagram and Connector
| 4WD ECU Connector |
| Pin |
Function |
| 1 |
MOTOR A |
| 2 |
MOTOR B |
| 3 |
LOCK MODE SWITCH (Input) |
| 4 |
- |
| 5 |
PRESSURE SENSOR SIGNAL (Input) |
| 6 |
- |
| 7 |
CAN communication line (Low) |
| 8 |
CAN communication line (High) |
| 9 |
- |
| 10 |
- |
| 11 |
- |
| 12 |
IG. POWER (Input) |
| 13 |
GROUND |
| 14 |
BATTERY (Input) |
| 15 |
PRESSURE SENSOR GROUND (-) |
| 16 |
PRESSURE SENSOR SUPPLY (+) |
| 17 |
- |
| 18 |
- |
See also:
Antenna Inspection
Antenna Cable
1.
Remove the antenna jack from the audio unit and antenna.
2.
Check for continuity between the center poles of antenna cable. ...
Interior lights
CAUTION
Do not use the interior lights for extended periods when the engine is not
running. It may cause battery discharge.
WARNING
Do not use the interior lights when driving in the dark. Acciden ...
Removal
Replacing an on/off solenoid valve (SS-A, SS-B) does not require
additional hydraulic pressure adjustment; however, the ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026