Kia Sorento: Shift Cable Components - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Shift Cable Components

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Cable Components

1. Shift lever mounting bolt
2. Shift lever assembly
3. Shift cable assembly
4. Shift lever knob & boots assembly
5. Manual control lever
6. Retainer

Shift Lever Installation
1. Install in the reverse order of removal.    Set shift lever and inhibitor ...

Shift Cable Removal
1. Remove the floor console. (Refer to Body - "Floor console") 2. Remove the air duct. 3. Dis ...

See also:

Parking Brake Assembly Installation
Parking Brake Shoe 1. Install the shoe hold down pin (A) and spring (B) by pressing and rotating the spring. 2. Install the ope ...

Adjustment
After replacing ETC module or ECM, the ETC adaptive value must be reset / relearned according to the following procedure. 1. Check DTC(s) and clear if exist. ...

Output Speed Sensor Circuit Diagram
...

Copyright © www.ksmanual.com 2014-2019