Kia Sorento: Shift Lever Installation - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Shift Lever Installation

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Shift Lever Installation

1.
Install in the reverse order of removal.
  
Set shift lever and inhibitor switch manual control lever to "N" position.
Shift Lever Removal
1. Remove the floor console. (Refer to Body - "Floor console") 2. Remove the air duct. 3. Dis ...

Shift Cable Components
1. Shift lever mounting bolt 2. Shift lever assembly 3. Shift cable assembly 4. Shift lever knob & boots assembly 5. Manual control lever 6. Retainer ...

See also:

Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

Auto Head lamp leveling Unit Removal
Height Sensor & Unit 1. Disconnect the negative(-) battery terminal. 2. Remove the height sensor connector (A). ...

Water pump Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage • From the bleed hole of the water pump Visually check ...

Copyright © www.ksmanual.com 2014-2020