Kia Sorento: Seat Heater Installation
Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Seat Electrical / Seat Heater Installation
| 1. |
Install the driver / assist seat heater.
(Refer to Body - "Front seat")
|
| 2. |
Install the rear seat LH heater and RH heater.
(Refer to Body - "Rear seat")
|
Seat Heater Removal
1.
Remove the driver / assist seat back heater (A) and cushion heater
(B).
(Refer to Body - "Front seat")
2.
...
Seat Heater Inspection
Front seat
1.
Operate the seat warmer after connecting the connector, and then
check the thermostat by measuring the temperature of seat surface.
...
See also:
Release Residual Pressure in Fuel Line
Whenever the high pressure fuel pump, fuel pipe, delivery pipe,
or injector is removed immediately after shutting off th ...
Panorama Sunroof Motor Inspection
1.
Close the panorama sunroof glass and blind completely (Full close
position).
2.
Disconnect the negative (-) battery terminal.
...
PTG Spindle Installation
1.
Connect the PTG spindle, bracket and connector.
Tightening torque :
6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft)
...
Copyright © www.ksmanual.com 2014-2019