Kia Sorento: Installation

Removal

1. Remove the tailgate trim in the trunk after removing the screws and clips. (Refer to Body - "Tailgate") 2. Remove the ...

Blind Spot Detection System

...

See also:

Photo Sensor Inspection
1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lam ...

Brake Booster Inspection
1. Inspect the check valve in the vacuum hose, intensifier and the connecting section.    ...

Blind Spot Detection Unit Installation
1. Install the BSD units to the rear bumper. 2. Install the rear bumper. 3. Connect the negative (-) battery te ...