Kia Sorento: Positive Crankcase Ventilation (PCV) Valve Inspection

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Emission Control System / Crankcase Emission Control System / Positive Crankcase Ventilation (PCV) Valve Inspection

1.

Insert a thin stick (A) into the PCV valve (B) from the threaded side to check that the plunger moves.

If the plunger does not move (PCV valve is clogged), clean or replace the valve.

Positive Crankcase Ventilation (PCV) Valve Removal

1. Disconnect the vapor hose (A). 2. Remove the PCV valve (B). ...

Positive Crankcase Ventilation (PCV) Valve Installation

1. Install in the reverse order of removal. PCV Valve installation: 1.9 ~ 2.8 N.m (0.19 ~ 0.29 kgf.m, 1.4 ~ 2.1 lb-ft) ...

See also:

Direct Electro Hydraulic Actuator Coupling Inspection
All units are filled up with coupling fluid (ultra-low viscosity ATF) prior to shipping. Inspection, fill-up, and replac ...

Pressure Sensor Removal
1. Remove the coupling assembly. (Refer to Coupling Assembly - "Direct Electro Hydraulic Actuator Coupling") 2. Remove th ...

Seat Belt Pretensioner (BPT) Description
The Seat Belt Pretensioners (BPT) are installed inside Center Pillar (LH & RH). When a vehicle crashes with a certain degree of frontal impact, the pretensioner seat belt helps to reduce ...

Categories

Copyright © www.ksmanual.com 2014-2026