Kia Sorento: Master Cylinder Installation - Brake System - Brake System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Master Cylinder Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Brake System / Brake System / Master Cylinder Installation

1.
Installation is the reverse of removal.
2.
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding")
Master Cylinder Removal
1. Turm ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the air cleaner assembly. G 2.4 GDI (Refer to ...

Brake Line Components
...

See also:

Trouble Symptom Charts
Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surgin ...

Engine Control Module (ECM) Adjustment
• After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed. 1) [If installing a used ECM] ...

Alternator Specification
Alternator Item Specification Rated voltage 13.5V, 130A Speed in use 1,000 ~ 18,000 rpm Voltage regulator IC Regulator bui ...

Copyright © www.ksmanual.com 2014-2019