Kia Sorento: Canister Close Valve (CCV)

Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting system operates. This valve is normally open when no voltage is applied.

Inspection

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the fuel pressure regulator valve connector. ...

Specification

Item Specification Coil Resistance (Ω) 19.9 ~ 22.9 [20°C(68°F) ...

See also:

Alternator Circuit Diagram
   • COM signal - When controlling the voltage generated, the ECM sends the target ...

Installation
   • Install the component with the specified torques. • ...

Power Tailgate Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the rear left luggage side trim. (Refer to Body - "Interior Trim") ...