1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the cluster fascia panel (A).
(Refer to Body - "Crash pad")
|
3. |
Remove the cluster fascia (A) from the housing after removing
4 screws.
|
4. |
Disconnect the cluster fascia connecters (A) and then remove the
cluster.
|
In-car Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the center fascia panel
(A).
...
Front Bumper Components
1. Front bumper cover
2. Front bumper lower stiffner
3. Front bumper upper stiffner
4. Front bumper side bracket
...
Relay Box (Passenger Compartment) Installation
1.
Install IPM(Intelligent intergrated Platform Module).
2.
Connect the IPM connector.
3.
Install the crash pad ...