Kia Sorento: Indicators And Gauges

ICM Relay Box Inspection

Rear Wiper Motor relay Check for continuity between the terminals. 1. There should be continuity between the No.1 and No.3 terminals when power and ground are conne ...

Component Location

1. Cluster assembly 2. Seat belt switch 3. Vehicle speed sensor 4. Engine coolant temperature sender 5. Oil pressure switch 6. Brake fluid level warning switch 7. Parking ...

See also:

Installation
1. Install in the reverse order of removal.    If the oil seal on the trans ...

Front Hub / Knuckle / Tone Wheel Inspection
1. Check the hub for cracks and the splines for wear. 2. Check the brake disc for scoring and damage. 3. C ...

Tire replacement
If the tire is worn evenly, a tread wear indicator will appear as a solid band across the tread. This shows there is less than 1/16 inch (1.6 mm) of tread left on the tire. Replace the tire when t ...