Kia Sorento: Fuel Sender Removal - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Fuel Sender Removal

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Sender Removal

1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A).

3.
Release the fixing hooks, and then remove the fuel sender (A).

Fuel Pump Motor Installation
1. Install in the reverse order of removal. ...

Fuel Sender Installation
1. Install in the reverse order of removal. ...

See also:

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...

Components Location
1. PCV Valve 2. Canister 3. Purge Control Solenoid Valve (PCSV) 4. Fuel Tank Pressure Sensor (FTPS) 5. Canister Close Valve (CCV) 6. Fuel Level Sender (FLS) 7. Fuel Ta ...

On-vehicle Inspection
Inspect ignition coil assembly and Perform spark test 1. Check for DTCs.    ...

Copyright © www.ksmanual.com 2014-2019