Kia Sorento: Fuel Sender Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Fuel Sender Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Sender Installation

1.
Install in the reverse order of removal.
Fuel Sender Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - Fuel Pump) 2. Disconnect the fuel sender connector (A). ...

Fuel Pressure Regulator Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - Fuel Pump) 2. Release the fixing hooks, and then remove the regulator cup ( ...

See also:

Ignition Coil Installation
1. Install in the reverse order of removal. Ignition coil installation bolts: 9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 Ib-ft) ...

Starter Cleaning
1. Do not immerse parts in cleaning solvent. Immersing the yoke assembly and/or armature will damage the insulation wipe these parts with a cloth only. ...

Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position. ...

Copyright www.ksmanual.com 2014-2019