Kia Sorento: Fuel Pump Motor Installation - Fuel Delivery System - Engine Control / Fuel System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Fuel Pump Motor Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pump Motor Installation

1.
Install in the reverse order of removal.
Fuel Pump Motor Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - Fuel Pump) 2. Disconnect the fuel sender connector (A). ...

Fuel Sender Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - Fuel Pump) 2. Disconnect the fuel sender connector (A). ...

See also:

Inhibitor Switch
Inhibitor Switch monitors the lever's position(P, R, N, D) and is used to control gear setting signals. ...

Front Impact Sensor (FIS) Removal
   Removal of the airbag must be performed according to the precautions/ procedures descr ...

PTG Spindle Installation
1. Connect the PTG spindle, bracket and connector. Tightening torque : 6.9 ~ 10.8N.m (0.7 ~ 1.1kgf.m, 5.1 ~ 8.0 lb-ft) ...

Copyright www.ksmanual.com 2014-2019