Kia Sorento: Front Impact Sensor (FIS) Description - SRSCM - Restraint - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Front Impact Sensor (FIS) Description

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Description

The front impact sensor (FIS) is installed in the Front End Module (FEM). They are remote sensors that detect acceleration due to a collision at its mounting location. The primary purpose of the Front Impact Sensor (FIS) is to provide an indication of a collision. The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
SRS Control Module (SRSCM) Variant coding
After replacing the SRSCM with a new one, MUST perform the УVariant CodingФ procedure.    1. On S ...

Front Impact Sensor (FIS) Components
...

See also:

Hands Free Switch Component Location
...

In-car Sensor Replacement
1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the center fascia panel (A). ...

Rear Body
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Side outer p ...

Copyright © www.ksmanual.com 2014-2019