1. |
Disconnect the negative (-) battery terminal.
|
2. |
Remove the front tire wheel guard.
(Refer to Body - "Front bumper")
|
3. |
Turn the bulb socket counterclockwise and then remove the fog
lamp bulb.
|
4. |
If it is necessary to replace the lamp assembly, remove the fog
lamp (A) after loosening the screws.
|
ESC Control Module Installation
1.
Installation is the reverse of removal.
2.
Tighten the HECU mounting bolts and nuts to the specified torque.
3.
...
Pressure Sensor Description
The 4WD ECU makes a Motor Pump(Actuator) turn round for generating an
oil pressure. And then it presses a multiple disk clutch and transfers the generated
torque into rear wheels. Its torque ...
Components Location
1. AVN (A/V & Navigation) head unit
2. Tweeter speaker
3. External amplifier
4. Roof antenna (Radio+Sirius+GPS)
5. Front door speaker
6. Rear door speaker
7. Subwo ...