Kia Sorento: Front Fog Lamps Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Front Fog Lamps Installation

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Installation

1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
Front Fog Lamps Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the front tire wheel guard. (Refer to Body - "Front bumper") ...

License Lamps Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp lens (A) from the panel after loosening a screw. ...

See also:

Circuit Diagram
Connector Pin Information No. Wire harness connector Panorama motor Blind motor 1 Ground 1 ...

IPM Trouble Diagnostics When Using GDS
1. The IPM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. 2. ...

Description
System Outline An optimal seat position set by a driver can be memorized in Power seat unit by IMS SW, which enables restoration of seat position set by the driver despite Pl ...

Copyright © www.ksmanual.com 2014-2019