Kia Sorento: Child-protector rear door lock - Door locks - Features of your vehicle - Kia Sorento XM Owners ManualKia Sorento: Child-protector rear door lock

Second Generation XM (2011-2019) / Kia Sorento XM Owners Manual / Features of your vehicle / Door locks / Child-protector rear door lock

The child safety lock is provided to help prevent children from accidentally\


The child safety lock is provided to help prevent children from accidentally opening the rear doors from inside the vehicle. The rear door safety locks should be used whenever children are in the vehicle.

1. Open the rear door.

2. Push the child safety lock located on the rear edge of the door to the lock ( lock is in the lock position, the rear door will not open even when the inner door) position. When the child safety
lock is in the lock position, the rear door will not open even when the inner door handle is pulled.

3. Close the rear door.

To open the rear door, pull the outside door handle.

Even though the doors may be unlocked, the rear door will not open by pulling the inner door handle (1) until the rear door child safety lock is unlocked.

WARNING - Rear door locks

If children accidentally open the rear doors while the vehicle is in motion, they could fall out of the vehicle, resulting in severe injury or death. To prevent children from opening the rear doors from the inside, the rear door safety locks should be used whenever children are in the vehicle.

Operating door locks from outside the vehicle
Turn the key clockwise to unlock and counterclockwise to lock. If you lock the driver’s door with a key, all vehicle doors will lock automatically. From the driver’s door, turn the key to the ...

Tailgate
...

See also:

Operation
Control Specification 1. MANUAL Operation (1) MANUAL Seat Operation SEAT is to be operated by MANUAL switch Input of SEAT. SLI ...

Interior Trim Components
1. Front pillar trim 2. Center pillar lower trim 3. Center pillar upper trim 4. Front door scuff trim 5. Rear door scuff trim 6. Cowlside trim 7. Rear pillar trim 8 ...

ECM Terminal And Input/Output signal
ECM Terminal Function Connector [C300-A] Pin No. Description Connected to 1 Ignition Coil (Cylinder #2) control output [NON-smart ke ...

Copyright © www.ksmanual.com 2014-2019