Kia Sorento: Control System Composition - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2020 Service ManualKia Sorento: Control System Composition

Second Generation XM (2011-2020) / Kia Sorento XM 2011-2020 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Control System Composition

Description
Automatic transaxle system relies on various measurement data to determine the current control status and extrapolate the necessary compensation values. These values are used to control the a ...

Component Location
1. Automatic transaxle 2. Inhibitor switch 3. Transaxle Control Module (TCM) 4. Valve body cover 5. Solenoid valve connect 6. Oil temperature sensor 7. Valve body assemb ...

See also:

Knock Sensor (KS)
Knocking is a phenomenon characterized by undesirable vibration and noise and can cause engine damage. Knock Sensor (KS) is installed on the cylinder block and senses engine knocking. Whe ...

Alternator Removal
1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...

Rear Cross Member Replacement
1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright © www.ksmanual.com 2014-2020