Kia Sorento: Air Ventilation Seat Removal
Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Removal
| 1. |
Remove the seat back cover (A).
(Refer to Body - "Front seat")
|
| 2. |
Remove the blower fan (A) after removing the screws from the seat
back.
|
| 3. |
Remove the air duct (A) after disengaging the hook.
|
| 4. |
Remove the seat cushion (A).
(Refer to Body - "Front seat")
|
| 5. |
Remove the blower fan (A) after removing the screws and disengaging
hook.
|
| 6. |
Disconnect the connecter and remove the blower (A).
|
Air Ventilation Seat Description
Air ventilation seat
It blows the indoor air through the blower fan installed at the seat cushion
and back lower part, and supplies the air into the seat cushion and the seat
back through ...
Air Ventilation Seat Installation
1.
Install the blower fan.
2.
Install the seat back and cushion.
...
See also:
Engine Control Module (ECM) Adjustment
•
After replacing the ECM of the vehicle with the immobilizer, the
following procedure must be performed.
1)
[If installing a used ECM]
...
Engine Control Module (ECM) Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Disconnect the ECM Connector (A).
...
Occupant Detection System (ODS)
Your vehicle is equipped with an occupant detection system in the front passenger's
seat.
The occupant detection system is designed to detect the presence of a properly-seated
front passenger ...
Copyright © www.ksmanual.com 2014-2021