Kia Sorento: Air Ventilation Seat Description - Seat Electrical - Body Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Air Ventilation Seat Description

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Body Electrical System / Seat Electrical / Air Ventilation Seat Description

Air ventilation seat
It blows the indoor air through the blower fan installed at the seat cushion and back lower part, and supplies the air into the seat cushion and the seat back through the duct.
It sends a indoor air to the seat surface through the air ventilation layer between upper and lower layer.
Seat Back Layers

Item
Description
A
Leather
B
Pad
C
Seat Heater
D
Upper Layer
E
Air Ventilation Layer
F
Lower Layer

Seat Cushion Layers

Fan

Item
Description
A
Fan Cover
B
Fan
C
Bracket

Seat Heater Inspection
Front seat 1. Operate the seat warmer after connecting the connector, and then check the thermostat by measuring the temperature of seat surface. ...

Air Ventilation Seat Removal
1. Remove the seat back cover (A). (Refer to Body - "Front seat") 2. Remove the blower fan (A) after removing the scr ...

See also:

Rearview camera (If equipped)
The rearview camera will activate with the ignition switch ON and the shift lever in the R (Reverse) position. This system is a supplemental system that shows behind the vehicle through the rearv ...

Rear Lower Arm Inspection
1. Check the bushing for wear and deterioration. 2. Check the rear lower arm for deformation. ...

SS-B Solenoid Valve(ON/OFF)
SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

Copyright © www.ksmanual.com 2014-2019