Kia Sorento: Under Body (4WD)
| Projected Dimensions |
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
| Actual-Measurement Dimensions |
| * These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ] |
|
|
|
|
| Front side member tooling hole (Ø25) |
Front side member tooling hole (Ø25) |
Side cover mounting hole (Ø11) |
|
|
|
|
| Side cover mounting hole (Ø11) |
Front sub frame mounting bolt |
Front sub frame mounting hole (Ø18) |
|
|
|
|
| Floor under cover mounting hole (Ø6.6) |
Front sub frame mounting hole (Ø11) |
Front side member tooling hole (Ø14) |
|
|
|
|
| Floor under cover mounting hole (Ø7) |
Floor under cover mounting hole (Ø7) |
Rear trailing arm mounting hole (Ø19) |
|
|
|
|
| Rear sub frame mounting hole (Ø22) |
Rear sub frame mounting hole (Ø7) |
Rear sub frame mounting bolt |
|
|
||
| Rear floor side member tooling hole (Ø14) |
Under Body (2WD)
Projected Dimensions
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
Actual-Measurement Dimensions
...
Front Cross Member
* These dimensions indicated in this figure are actual-measurement
dimensions. [ Unit : mm (inch) ]
...
See also:
Rear Hub - Carrier Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Front Bumper Components
1. Front bumper cover
2. Front bumper lower stiffner
3. Front bumper upper stiffner
4. Front bumper side bracket
...
Power Mosfet (DATC) Inspection
1.
Measure the resistance between the terminals.
2.
If the measured resistance is not within specification, the blower
resistor must be rep ...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026