Kia Sorento: Seat Belt Buckle Switch (BS) Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Removal
| 1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
| 2. |
Remove the front seat assembly. (Refer to the Body group- Front
seat)
|
| 3. |
Loosen the seat belt buckle mounting bolt and remove the seat
belt buckle switch.
|
Seat Belt Buckle Switch (BS) Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
1.
...
See also:
Removal
1.
Remove the tailgate trim in the trunk after removing the screws
and clips.
(Refer to Body - "Tailgate")
2.
Remove the ...
Front Driveshaft Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Crankshaft Components
1. Crankshaft upper bearing
2. Thrust bearing
3. Crankshaft
4. Crankshaft lower bearing
5. Main bearing cap
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026