Kia Sorento: Oil hydraulic Motor(Actuator) Description

The 4WD ECM controls the Pump Motor Pump (Actuator) to generating an oil pressure. The pressure engages a multiple disk clutch to transfer torque to the rear wheels. The torque to the rear wheels varies according to the pressure on the clutch.

Direct Electro Hydraulic Actuator Coupling Installation

1. Install in the reverse order of removal.    • ...

Oil hydraulic Motor(Actuator) Circuit Diagram

...

See also:

General Service Information
Protection Of The VehicleAlways be sure to cover fenders, seats, and floor areas before starting work.    The support rod must be ...

Start/Stop Button Removal
1. Disconnect the negative(-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...

Side Impact Sensor (SIS) Description
Side Impact Sensor (SIS) system consists of two Front-SIS which are installed at each center of the front door module (LH and RH) and two Rear-SIS which are installed at each rear pillar near ...