Kia Sorento: Circuit Diagram

Specifications

Direct control VFS[T/CON] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 0 ~ 539.37 (0 ~ 5.5, 0 ~ 78.23) Current value(mA) ...

Inspection

1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

See also:

Specification
Item Specification Rated Voltage DC 12.0V Operating voltage DC 10.7 ~ 15V Operating temperature -30 ~ 75°C (-22 ~ 167°F) ...

AC Inverter Unit Installation
1. Install the AC inverter unit. 2. Install the luggage side trim. 3. Connect the negative (-) battery terminal ...

Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position. ...