Kia Sorento: Output Speed Sensor Specifications - Automatic Transaxle Control System - Automatic Transaxle System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Output Speed Sensor Specifications

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor Specifications

▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(1.45~1.9) 0.0571~0.0748
Output voltage (V)
High
1.18 ~ 1.68
Low
0.59 ~ 0.84

Output Speed Sensor Description
The output speed sensor (A) is a vital unit that measures the rate of rotation of the transaxle's turbine shaft and output shaft, and delivers the readings to the Transaxle Control Module ...

Output Speed Sensor Circuit Diagram
...

See also:

Cruise Control Switch Inspection
Measuring Resistance 1. Disconnect the cruise control switch connector from the control switch. 2. Measure resistance between t ...

Alternator Removal
1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...

Compressor Removal
1. If the compressor is marginally operable, run the engine at idle speed, and let the air conditioning work for a few minutes, then shut the engine off. ...

Copyright © www.ksmanual.com 2014-2019