Kia Sorento: Component Location
Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Automatic Transaxle System / Hydraulic System / Component Location
| 1. Radiator(Automatic transaxle oil cooler) 2. Mounting insulator 3. Valve body cover 4. ATF hose&pipe 5. Automatic transaxle 6. Radiator(Automatic transaxle oil cooler) upper mounting bracket 7. Upper mounting insulator |
8. Bypass valve 9. ATF injection hole(eyebolt) 10. Oil level plug 11. Oil drain plug 12. ATF Warmar 13. Coolant hose&pipe |
| 1. Automatic transaxle 2. Valve body assembly 3. Oil pump assembly |
Description
The hydraulic system consists of oil, an oil filter, an oil pump, and
a valve body (valves and solenoid valves).
The oil pump is powered by the engine. ATF passes through the oil filter
...
Oil Pump Description
The oil pump is built-in as a single unit with the 26Brake chamber. Rotation
of the pump builds the hydraulic pressure needed for the lubrication of the
various parts of the transaxle and ope ...
See also:
Components and Components Location
Components (1)
1. Parking brake pedal
2. Equalizer assembly
3. Parking brake cable
Components (2)
1. Parking brake pedal assembly
2. Front parking brak ...
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Measure the output voltage of the RPS at idle and various engine
speed.
...
Rear Oil Seal Removal
1.
Remove the automatic transaxle.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
...
Copyright В© www.ksmanual.com 2014-2024