Kia Sorento: Components Location
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Automatic Transaxle System / Automatic Transaxle / Components Location
| 1. Automatic transaxle 2. Shift cable bracket 3. Inhibitor switch connector 4. Manual control lever 5. Automatic transaxle mounting support bracket 6. Solenoid valve connector 7. ATF hose&pipe 8. Valve body cover 9. Bypass valve |
10. ATF Warmer 11. Inhibitor switch 12. ATF Injection hole(eyebolt) 13. Coolant hose&pipe assembly 14. Under cover 15. Side cover 16. Automatice transaxle mounting bracket cover 17. Automatice transaxle mounting bracket bolt 18. CKP Sensor |
| 1. Automatic transaxle 2. Shift cable bracket 3. Inhibitor switch connector 4. Manual control lever 5. Automatic transaxle mounting support bracket 6. Solenoid valve connector 7. ATF hose&pipe 8. Valve body cover 9. Bypass valve 10. ATF Warmer 11. Inhibitor switch |
12. ATF Injection hole(eyebolt) 13. Coolant hose&pipe assembly 14. Under cover 15. Side cover 16. Automatice transaxle mounting bracket cover 17. Automatice transaxle mounting bracket bolt 18. Transfer assembly 19. Propeller shaft 20. Coupling Assembly 21. CKP Sensor |
Removal
1.
Remove the engine cover.
(Refer to Engine Mechanical System - "Engine cover")
2.
Remove the air cleaner assembly and air du ...
See also:
Installation
•
Install the component with the specified torques.
•
...
Thermostat Inspection
1.
Immerse the thermostat in water and gradually heat the water.
2.
Check the valve opening temperature.
Valv ...
Starter Cleaning
1.
Do not immerse parts in cleaning solvent.
Immersing the yoke assembly and/or armature will damage the insulation
wipe these parts with a cloth only.
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026