Kia Sorento: Circuit Diagram

Specification

Item Specification Coil resistance (Ω) 30.0 ~ 35.0 [20°C(68°F)] ...

Inspection

1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between VIS valve ...

See also:

G-Sensor Calibration
1. Ignition "OFF", connect GDS. 2. Ignition "ON" & Engine "OFF" select vehicle name and ESP system. ...

Smart key unit Installation
Smart Key Unit 1. Install the smart key unit. 2. Install the smart key unit mounting bolt and nut, and then connect the connector. ...

Direct Electro Hydraulic Actuator Coupling Components
1. Coupling assembly 2. Input shaft 3. Pressure sensor 4. Extension wiring 5. Oil hydraulic Motor(Actuator) ...