Kia Sorento: Inspection

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Control / Fuel System / Engine Control System / Rail Pressure Sensor (RPS) / Inspection

1.	Connect the GDS on the Data Link Connector (DLC).

2.

Measure the output voltage of the RPS at idle and various engine speed.

Condition	Output Voltage (V)
Idle	Approx. 1.2
1,500 rpm	2.0 ~ 2.2
6,300 rpm	Approx. 2.8

Circuit Diagram

...

Removal

1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Release the residual pressure in fuel line. (Refe ...

See also:

Engine Room Under Cover Components
1. Under Cover 2. Side Cover (RH) 3. Side Cover (LH) ...

Inspection
Lighting Switch Inspection 1. With the multi function switch in each position, make sure that continuity exists between the terminals below. If continuity is no ...

Roof Antenna Installation
1. Connect the roof antenna connectors. 2. Install the rear roof trim. ...

Categories

Copyright © www.ksmanual.com 2014-2026