Kia Sorento: Circuit Diagram

Wave Form

...

Inspection

1. Check the signal waveform of the CMPS and CKPS using the GDS. Specification: Refer to “Wave Form� ...

See also:

Accelerator Pedal Installation
1. Install in the reverse order of removal. Accelerator pedal module installation nut: 16.7 ~ 25.5 N.m (1.7 ~ 2.6 kgf.m, 12.3 ~ 18 ...

Rear combination lamp Installation
1. Install the tailgate combination lamp assembly after replacing the bulb. 2. Install the lamp cover to the tailgate after connecting the ...

Emergency Fastening Device (EFD) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the negative (-) cable from battery and wait for at least thirty seconds. ...