Kia Sorento: Inspection - Crankshaft Position Sensor (CKPS) - Engine Control System - Engine Control / Fuel System - Kia Sorento XM 2011-2021 Service ManualKia Sorento: Inspection

Second Generation XM (2011-2021) / Kia Sorento XM 2011-2021 Service Manual / Engine Control / Fuel System / Engine Control System / Crankshaft Position Sensor (CKPS) / Inspection

1.
Check the signal waveform of the CMPS and CKPS using the GDS.

Specification: Refer to “Wave Form”

Circuit Diagram
...

Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Disconnect the crankshaft position sensor connector (A). ...

See also:

Reverse Automatic Braking (RAB) system operation
When the Reverse Automatic Braking (RAB) system is in operation, the range between the vehicle and the detected object will be indicated on the audio/navigation monitor. Also, warning sounds will ...

Wheel Hub nut tightening sequence
Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Mirrors
Always check that the inside and outside mirrors are properly adjusted before you start driving. ...

Copyright © www.ksmanual.com 2014-2021