Kia Sorento: ETC (Electronic Throttle Control) System

Engine Control Module (ECM) Adjustment

• After replacing the ECM of the vehicle with the immobilizer, the following procedure must be performed. 1) [If installing a used ECM] ...

Description

The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cable, an Acc ...

See also:

Engine Room Under Cover Removal and Installation
1. Unfasten the fasteners and bolts and then remove the engine room under cover (A). Tightening torque: 7.8 ~ 11.7 N.m (0.8 ~ 1.2 kgf ...

Component Location
1. Rear wiper arm & blade 2. Tailgate glass hole 3. Grommet 4. Rear wiper arm nut 5. Rear wiper motor assembly 6. Head cap 7. Rear wiper motor bolt ...

Battery replacement
The transmitter uses a 3 volt lithium battery which will normally last for several years. When replacement is necessary, use the following procedure. 1. Insert a slim tool into the slot and gently ...