Kia Sorento: Alternator Reassembly - Charging System - Engine Electrical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Alternator Reassembly

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Engine Electrical System / Charging System / Alternator Reassembly

1.
Reassemble in the reverse order of disassembly.
  
When reassembling OAD pulley, replace with new OAD cap.
Alternator Disassembly
1. Remove the alternator cover (A) using a screw driver after loosening the nuts (B). 2. Remove the slip ring guide (A) and then lo ...

Alternator Inspection
[Rotor] 1. Check that there is continuity between the slip rings (C). 2. Check that there is no continuity between the slip ...

See also:

Normal maintenance schedule
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage an ...

Alternator Removal
1. Disconnect the battery negative terminal. 2. Disconnect the air compressor connector (A) and the alternator connector (B), and remove th ...

Specification
Temperature Resistance (kΩ) °C °F -40 -40 48.14 -20 -4 14.13 ~ 16.83 0 32 5.7 ...

Copyright www.ksmanual.com 2014-2025