Kia Sorento: Alternator Inspection - Charging System - Engine Electrical System - Kia Sorento XM 2011-2019 Service ManualKia Sorento: Alternator Inspection

Second Generation XM (2011-2019) / Kia Sorento XM 2011-2019 Service Manual / Engine Electrical System / Charging System / Alternator Inspection

[Rotor]
1.
Check that there is continuity between the slip rings (C).

2.
Check that there is no continuity between the slip rings and the rotor (B) or rotor shaft (A).
3.
If the rotor fails either continuity check, replace the alternator.
[Stator]
1.
Check that there is continuity between each pair of leads (A).

2.
Check that there is no continuity between each lead and the coil core.
3.
If the coil fails either continuity check, replace the alternator.
Alternator Reassembly
1. Reassemble in the reverse order of disassembly.    • ...

Battery Description
1. The MF(Maintenance Free) battery is, as the name implies, totally maintenance free and has no removable battery cell caps. 2. The MF(Mai ...

See also:

Oil Pan Installation
1. Install the oil pan. (1) Using a gasket scraper, remove all the old sealant material from the gasket surfaces. ...

Ambient Temperature Sensor Inspection
1. Turn the ignition switch ON. 2. Remove the front bumper. (Refer to Body - "Front Bumper") 3. ...

Trailing Arm Replacement
1. Remove the rear wheel & tire. Tightening torque : 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft) ...

Copyright © www.ksmanual.com 2014-2019