Kia Sorento: Thermostat Inspection - Cooling System - Engine Mechanical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Thermostat Inspection

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Engine Mechanical System / Cooling System / Thermostat Inspection

1.
Immerse the thermostat in water and gradually heat the water.

2.
Check the valve opening temperature.

Valve opening temperature: 82°C (177°F)
Full opening temperature: 95°C (205°F)

If the valve opening temperature is not as specified, replace the thermostat.
3.
Check the valve lift.

Valve lift : 8 mm (0.3 in) or more at 95°C (205°F)

If the valve lift is not as specified, replace the thermostat.
Thermostat Removal and Installation
   Removal of the thermostat would have an adverse effect, causing a lowering of cooling efficiency. Do not remove the ther ...

Thermostat Troubleshooting
Symptoms Possible Causes Remedy Coolant leakage • From the thermostat gasket Check the mounting bolts ...

See also:

Front Door Adjustment
Glass Adjustment    • Check the glass run channel for damage or deterioration, and re ...

Yaw-rate and G Sensor Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Underdrive Brake Control Solenoid Valve(UD/B_VFS)
Underdrive brake control solenoid valve(UD/B) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the underdrive brake. ...

Copyright www.ksmanual.com 2014-2025