Kia Sorento: CVVT & Camshaft Components - Cylinder Head Assembly - Engine Mechanical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: CVVT & Camshaft Components

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Engine Mechanical System / Cylinder Head Assembly / CVVT & Camshaft Components

1. Camshaft bearing cap
2. Camshaft front bearing cap
3. Exhaust camshaft
4. Intake camshaft
5. Exhaust CVVT assembly
6. Intake CVVT assembly
7. Exhaust camshaft upper bearing
8. Intake camshaft lower bearing
9. Fuel pump bracket

Cylinder Head Cover Installation
1. Install cylinder head cover. (1) The hardened liquid gasket sealant located on the upper area between timing chain cover and cyli ...

CVVT & Camshaft Description
Continuous Variable Valve Timing (CVVT) system advances or retards the valve timing of the intake and exhaust valve in accordance with the ECM control signal which is calculated by the engine ...

See also:

CVVT (Continuously Variable Valve Timing) System Operation Principle
The CVVT has the mechanism rotating the rotor vane with hydraulic force generated by the engine oil supplied to the advance or retard chamber in accordance with the CVVT oil control valve con ...

Schematic Diagrams
Circuit Diagram - ESC (1) Circuit Diagram - ESC (2) Circuit Diagram - ESC (3) Circuit Diagram - ESC (4) ESC connector input/output Connector Terminal Specifica ...

Fuel Sender Removal
1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). ...

Copyright www.ksmanual.com 2014-2026