Kia Sorento: Intake Actuator Description - Blower - Heating,Ventilation And Air Conditioning - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Intake Actuator Description

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Heating,Ventilation And Air Conditioning / Blower / Intake Actuator Description

The intake actuator is located at the blower unit. It regulates the intake door by a signal from the control unit. Pressing the intake selection switch will shift between recirculation and fresh air modes.
Climate Control Air Filter Replacement
1. Disconnect the stopper (B) from the glove box (A). 2. Disconnect the air damper (A) from the glove box (B). ...

Intake Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the intake actuator connector. 3. Verify that the intake actuato ...

See also:

Component Location
1. Slide motor 2. Front height motor 3. Rear height motor 4. Lumber support motor 5. Power seat switch 6. Reclining motor 7. Reclining switch 8. Lumber support swit ...

Fuel Pump Motor Installation
1. Install in the reverse order of removal. ...

Installation
   • Install the component with the specified torques. • ...

Copyright © www.ksmanual.com 2014-2024