Kia Sorento: AC Inverter Switch Removal - AC Inverter System - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: AC Inverter Switch Removal

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / AC Inverter System / AC Inverter Switch Removal

  
Pry the trim off using a plastic trim tool and apply protective tape around the related parts, to prevent damage.
Put on gloves to protect your hands.
Take care not to scratch the body surface.
1.
Disconnect the negative (-) battery terminal.
2.
Using a screwdriver or remover, remove the floor console upper tray (A).

3.
Disconnect the connectors (A).

4.
Remove the gear boots (B) and gear knob (A).

5.
Using a screwdriver or remover, remove the console upper cover (A).

6.
Disconnect the connectors (A).

7.
Remove the AC switch (A) from the console upper cover.

AC Inverter Oultet Installation
1. Install the power outlet switch. 2. Install the rear console cover. 3. Connect the negative (-) battery term ...

AC Inverter Switch Installation
1. Install the AC switch. 2. Install the console upper cover and console upper tray. 3. Connect the negative (- ...

See also:

Warning Messages
Shift to "P" position (for smart key system and automatic transaxle) This warning message illuminates if you try to turn off the engine without the shift lever in P (Park) position. ...

Inspection
Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. 2. Cov ...

Fuel Filler Door Open Switch Inspection
1. Remove the front door trim panel. (Refer to Body - "Front door") 2. Disconnect the switch connector (A) from wiring. ...

Copyright www.ksmanual.com 2014-2026