Kia Sorento: AC Inverter Oultet Installation

AC Inverter Oultet Removal

1. Disconnect the negative (-) battery terminal. 2. Remove the rear console cover. (Refer to Body - "Console") ...

AC Inverter Switch Removal

   • Pry the trim off using a plastic trim tool and apply protective tape around the rela ...

See also:

Dynamic Damper Components
1. BJ assembly 2. BJ circlip 3. BJ boot band 4. BJ boot 5. Dynamic damper band 6. Dynamic damper 7. Shaft 8. TJ boot band 9. TJ boot 10. Spider assembly ...

Front Hub / Knuckle / Tone Wheel Disassembly
1. Remove the brake disc (B) from the knuckle assembly (A). Tightening torque: 4.9 ~ 5.9N.m (0.5 ~ 0.6kgf.m, 3.6 ~ 4.3Ib-ft) ...

Overdrive Clutch Control Solenoid Valve(OD/C_VFS)
Overdrive clutch control solenoid valve(OD/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the overdrive clutch. ...