Kia Sorento: Front Fog Lamps Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2025 Service ManualKia Sorento: Front Fog Lamps Installation

Second Generation XM (2011-2025) / Kia Sorento XM 2011-2025 Service Manual / Body Electrical System / Lighting System / Front Fog Lamps Installation

1.
Install the front fog lamp bulb.
2.
Connect the fog lamp connector.
3.
Install the front tire wheel guard.
Front Fog Lamps Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the front tire wheel guard. (Refer to Body - "Front bumper") ...

License Lamps Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the license lamp lens (A) from the panel after loosening a screw. ...

See also:

Rail Pressure Sensor (RPS)
Rail Pressure Sensor (RPS) is installed on the delivery pipe and measures the instantaneous fuel pressure in the delivery pipe. The sensing element (Semiconductor element) built in the sensor ...

Cooling Fan Description
Control the cooling motor voltage in according to the duty(300Hz) of ECM. [ECU → PWM Input Signal(SI : 300Hz)] Signal Input Duty (%) Motor Voltage (V) 10 ...

Trouble Symptom Charts
Trouble Symptom 1 Trouble Symptom 2 Trouble symptom Probable cause Remedy The set vehicle speed varies greatly upward or downward "Surgin ...

Copyright www.ksmanual.com 2014-2025